We're not familiar with the Forte 1.6L engine as the 2.0L and 2.4L engines were the only engines offered in the 2010-2013 U.S. Forte.

Does your Forte 1.6L have a MAF sensor?

Typically a bad MAP sensor would give a P0106 code.

P2192 - you should check your primary O2 sensor, look for a bad injector or high fuel pressure, or make sure there is no exhaust leak before the O2 sensor.

 

I already clean o2 sensor,injector
It uses map sensor
But i cant understand the Air Mass Adaptation value

 

Replace MAP sensor with oem factory MAP sensor if after spraying sensor with MAP/MAF cleaner still is malfunctioning.

The air mass adaptation, not enough air, too much air, leaks, ECU/ECM is compensating for too much air or not enough air therfore forcing other vehicles sensors & systems to pick up the slack.

Do not rub, scape, scratch, hit, bang & or dry with napkins/microfiber towel the MAF/MAP sensor. You'll ruin the heating element & or throw off readings.

Spray it & let it air dry, that's it.

 

Thank you dear🙏

 

Now getting this code